7 Easy Steps To Open Your Pool For Summer Homevestors 14 steps for opening your inground pool. 1. remove leaves & water from your pool cover (or safety cover) pool cover maintenance the wayne 1 4 hp reinforced thermoplastic pool cover pump is a great addition to your pool maintenance. wayne model wapc250 has iswitch technology, which activates the pump once the water level is at, or above 2 1 8”. First, remove your pool cover, clean it and store it securely. be sure to remove any debris or standing water that may have accumulated on the cover over the winter months. once the cover is clean, remove it from the pool and store it in a dry, cool place. 2. fill your pool up.
How To Open A Swimming Pool Opening For Summer Easy Pool Open 2. clean the pool cover. once the cover is removed, it needs to be cleaned before storing. the optimal location to clean your cover is a large, flat patch of grass. when transporting your cover to the cleaning location, ensure it does not rub against any rough surfaces, such as a driveway or sidewalk. Unclip the cover at one end of the pool. then, two people should stand on either side of the cover. working from one end of the pool to the other, unclip the cover springs until you get to the same end and one short side of the cover is still attached. undo the final side, leaving the two corners attached. Ensure a smooth and easy pool season by following these steps: 18 pool opening steps. remove any standing water and remove the cover. remove any heavy debris from the bottom of the pool and sweep the walls of the pool. take out the winterizing plugs in fittings, such as skimmers, and return fittings. make sure the water is at the proper level. Inspect your pool’s walls, checking for cracks and tears in the tile or vinyl layer. if your pool filter is dirty, spray it down with a hose. let it breathe. give your pool a little time before hopping in. keep the water circulating to avoid algae growth and cut down on maintenance time.
Comments are closed.