Tips And Tricks For Spooling A Spinning Reel With Braided Line Youtube đź‘Źđź‘Ź does anyone else spool up their reels like this? we love seeing cool #tekkers by our #omcfamily @stevehillfishing @carptuitionsocials spooling the new @. 2. pinch the line and slowly crank the reel. you should pinch the line lightly, about 12 in (30 cm) above the reel and pull it tight. crank the reel slowly, about 20 times, and let the line slide through your pinched fingers. stop cranking and allow your line some slack to inspect it for twists.
Tricks For Spooling Casting Reels In Your Boat Youtube Thread the line: take the end of your fishing line and thread it through the first rod guide, then tie it onto the spool. a simple arbor knot should do the trick. secure the line: close the bail arm to secure the line onto the spool. apply tension: hold the line between your fingers to create a slight tension. With your line threaded through that first guide, tie it to the reel’s spool, lie the filler spool on the ground and start reeling. the line should come off the filler spool in the same direction as it goes onto the spool. at least that’s how it’s been explained to me. no, it doesn’t make sense to me either. Stand the filler spool upright. run the line through all the guides. open the bail and tie the line to the reel’s spool, using an arbor knot. close the bail, and fill the reel with line. don’t. Step 1: attach the line to the spool – tie a knot to the arbor and trim off any excess line. step 2: place the spool in a holder – use a spool holder to keep the spool in place and allow it to spin freely. step 3: apply tension – use your hand to apply tension to the line as you begin to spool it onto the reel.
Comments are closed.