Dimensioning In Creo Parametric Youtube This creo parametric tutorial shows all the various ways to create dimensions for geometric entities in sketch mode. this is a long video, so you can jump to. Dimensioning in creo parametricordinate dimension:ordinate dimensioning is necessary for machning the component.the dimensions are provided as per the machi.
Drawing Detailing In Creo Parametric With Gd T Part 02 Drawing Views This creo parametric tutorial video shows you how to create dimensions manually as annotations as part of the model based definition process. it shows how to. 1. dimensioning a chamfer in a drawing: • if the chamfer was created using the chamfer feature in creo, dimensions can be shown directly in the drawing. • in the drawing, go to the annotate tab and select the “show model annotations” icon. • ensure that “dimension” is selected in the pop up, and then select the chamfer to show. About dimensioning the model. dimensioning the models in your drawings can be as simple or complex as required. to meet your drawing needs, you can: • show driving 3d model dimensions, which maximizes model drawing associativity. • insert driven dimensions, which provides flexibility for repeating and nonexistent dimensions. All feature dimensions appear. to select more than one feature for editing, hold down the ctrl key and double click. • when you hold down the ctrl key and double click an item, this selects it or removes it from the selection and activates the edit mode. you can change dimension values and properties for the selected items.
Dual Dimensioning In Creo Parametric Youtube About dimensioning the model. dimensioning the models in your drawings can be as simple or complex as required. to meet your drawing needs, you can: • show driving 3d model dimensions, which maximizes model drawing associativity. • insert driven dimensions, which provides flexibility for repeating and nonexistent dimensions. All feature dimensions appear. to select more than one feature for editing, hold down the ctrl key and double click. • when you hold down the ctrl key and double click an item, this selects it or removes it from the selection and activates the edit mode. you can change dimension values and properties for the selected items. To add or modify a dimension. 1. select one or two entities as references and then click design > dimension. a default dimension appears. 2. to select a different dimension option, right click and choose one from the shortcut menu. 3. to remove a selected reference, hold down the ctrl key and reselect the reference. 4. The entity was not made in the part mode with that feature dimensioned as a diameter so i cannot just show the dimension. in part sketcher mode, you can easily make a diameter dimension by left clicking the edge, left clicking the centerline, then left clicking the edge a second time and placing the dimension. i swear the exact same steps could.
Comments are closed.