Diy Light Up Led Dress With Color Changing Rgb Leds The rgb led strip controller has a 5.5mm x 2.1mm power connector. i purchased power plugs that require soldering but if you would like to use wire crimps you can purchase an extension cable which you can cut and splice. 3. finished led dress. here is my niece trying out the finished led dress before halloween. Check out the totally awesome slow color change suit jacket lapels i put together in 5 minutes: that’s 3.5 minutes to unwrap each led light, 0.5 minute to pull out their safety tabs, and 1 minute to clip them on equal distances apart. you’re welcome, world. if doing this for a play, a production, for cosplay, or any ol’ party night.
Diy Light Up Led Dress With Color Changing Rgb Leds Step 10: attach the light strip to the skirt. to attach the light strip to the skirt it helps to put the skirt on a dress form, but you could also put it on a person, or clip it to a hanger. with the skirt on the form i pinned the light strip to the bottom layer of tulle about three inches up from the hem. Diy rgb led dress. Step 4: build the pants. solder a wire to the positive connection on each of the two led strips. twist and solder the two positive leads together. repeat the process for the two negative leads. attach a male or female jst connector to these leads (it doesn't matter which you use. Step 10: securing components. first, we secured the led strip by cutting it to the required length on the base layer. three connections will come out of the base layer. so we can pass these wires to the hole that we made on purpose. note: you should be aware of the arrow mark in the strip while attaching it.
Comments are closed.