The Line Is Inclined To Both The Reference Plane Problem 1 Engineering drawing projection of straight line inclined to both planes, by subhodaya, line inclined to h.p and v.p, engineering graphics, e.d video lectures. Short video explaining the step by step procedure to obtain projection of given line which is inclined to both reference planes (i.e. hp and vp) this is the.
Engineering Drawing Line Inclined To Both The Reference Planes Youtube 1. a line ab measuring 80 mm long is inclined at an angle of 30o to hp and 45o to vp. the point a is 20 mm above hp and 30 mm in front of vp. draw the proje. By lifting point c and reducing the altitude, the front view of the plate appears as an inclined line. the angle between this inclined line and the horizontal plane (hp) is measured and found to be 54 degrees. q: what are the dimensions of the isosceles and equilateral triangles? the dimensions of both triangles are 50 mm for the base, 80 mm. 1 1. connect ab which will be the auxiliary top view. since the top view of the line appears inclined to vp at 600, draw the x 2y line inclined at 600 to the auxiliary top view ab at any convenient. 2. distance from it. draw the projections from a and b perpendicular to x 2y and on them step off 5a’ = 3a ’ and 6b’=4b ’. Projection of a plane inclined to one and perpendicular to the other plane: download: 24: projection of a plane inclined to both the reference planes i: download: 25: projection of a plane inclined to both the reference planes ii: download: 26: introduction to types of solids: download: 27: projection of solids in simple positions: download: 28.
Comments are closed.