Honda Cr V Radiator Replacement Cooling System

Honda Cr V Radiator Replacement Cooling System Honda cr v (2006–2011) service manual engine cooling cooling system radiator replacement. for japan produced model. 1. drain the engine coolant. 2. remove the hood support rod, then use it as shown to prop the hood in the wide open position. 3. remove the bulkhead cover. 4. Radiator cap test. 1. remove the radiator cap (a), wet the seal with engine coolant, then install it on the pressure tester (b) (commercially available). 2. apply a pressure of 93 123 kpa (0.95 1.25 kgf cm2, 14 18 psi) water passage replacement. 1. drain the engine coolant. 2.

Mishimotoв Honda Cr V 1998 Oem Replacement Engine Coolant Radiatorо A perfect example was when i just changed my rear differential fluid and cvt transmission fluid. the dealership service advisor quoted me almost $1500 i paid under $100 for the fluids and it took me about 2 2.5 hours to do. the dealerships don’t make money from selling cars. Give yourself at least 5 6 hours if you never did this before. items needed:radiator (move old parts to the new radiator like rubber feet, temp sensor, etc. Parts list. radiator: denso 2213209 ($51.79 from rockauto) radiator upper hose: dayco 71747 ($9.73 from rockauto) radiator lower hose: dayco 71918 ($10.98 from rockauto) radiator hose clamps (quantity 4) (36.5mm chuo spring, #9,#10 on diagram below): honda 19511 ph7 003 ($21.76 from hondapartsnow ; $5.44 each). Honda cr v (2006–2011) service manual engine cooling cooling system water passage replacement. 1. drain the engine coolant. 2. remove the alternator. 3. remove the condenser fan shroud assembly. 4. remove the a c compressor without disconnecting the a c hoses (see step 34).