How To Bleed The Bmw K1300 Cooling System Youtube This video goes over the coolant bleed process for the k1300 enjoy amazon xtremepowerus cooling system vacuum refill dp b00lbm12yo ref=sr 1 19. Radiator fill and system bleed for k1300 series engines.
How To Bleed Bmw Cooling System Youtube Bleeding coolant or checking water pump operation:here’s the instructions 1. turn ignition on2. do not start vehicle 3. turn heat to max 4. put fan speed on. Put the cap on. if necessary add a little coolant to the burp tank to the max line. start the bike and let it warm up to the point that the thermostat has opened and the coolant is circulating. remove the cap from the bleeder on the right side of the motor which is just below and forward of your chain tensioner. Cooling system refill it is possible to refill the cooling system and bleed it without the vacuum pump. it is just a little harder. i refilled my system after checking the valves by first filling the radiator, capping it, then attaching a container filled with coolant with a clear hose out the bottom to the bleed valve on the water pump. Open the hood and remove the radiator cap. key fob inserted, no brake pedal, press start. driver and pass air temp controls all the way to max temp. press the defrost button to turn it on. manually adjust the fan speed to the slowest setting (not off) then hold the gas pedal down all the way for 10 seconds.
Comments are closed.