How To Calibrate Your Right Weight Scale Youtube Locate the calibration button of the digital weight scale. it generally carries one of the following prints: “cal,” “function,” “mode,” or “cal mode.”. now press this button down until the digits displayed on the scale turn to “0,” “000,” or “cal.”. at this point, the scale should be in calibration mode. Step 1: clean and prepare the scale. prior to calibrating your digital scale, it is crucial to clean and prepare it appropriately. follow these steps to ensure a successful calibration: clean the scale: use a damp cloth and mild soap to wipe the scale’s surface.
How To Calibrate Weighing Scales Youtube Wipe your scale with a damp, soapy cloth and set it down on a flat, sturdy surface. then, turn on your scale and let it warm up for 1 minute. consult your scale’s owner’s manual to enter calibration mode. for instance, hold the “mode” button until the display screen flashes “cal.”. Step #4. turn on the digital scale and wait until it reads 0. step #5. most digital scales will have a calibration mode which can be found using the mode button. push the mode button until “cal” or calibrate shows on the screen. there may also be a calibration switch instead of a button which will need to be turned on. The process varies by model but generally follows this procedure: clear the platform completely and power on the scale. locate the calibration button, switch or port, often on the back. activate calibration mode according to manual instructions. often, you hold down a button for 5 seconds. Using the tweezers, place the calibration weight on the center of the scale’s weighing surface. ensure that the calibration weight matches the weight capacity of your digital scale. step 5:verify the reading. check the measurement displayed on the digital scale. the weight displayed should match the weight of the calibration weight.
Comments are closed.