How To Change The Egr Thermostat On E46 Bmw 3 Series 9 Fleetime Finally, untighten the bolt with one screwdriver so you can remove the hose from the egr thermostat. step 3: remove and replace the yellow “o ring” that is fitted onto the thermostat. try smearing the tiniest amount a hylomar around its shoulder and this should be done before the refitting. step 4:. Diy: change the egr thermostat on e46. symptoms: engine temperature arrives very hard to 90c and does not maintain it at 90 degrees. the temperature will get down even to 40 50 degrees when driving out of town at high speed. solution: changing the egr thermostat (it is 90% of cases). i recommend to go for oe bmw or berh (the manufacturer for.
How To Change The Egr Thermostat On E46 Bmw 3 Series Diy B In this video i show you how easy it is to replace the thermostat on a bmw. this is specific to the m57 and m47 6 cylinder diesel engines. this would apply t. Replace egr thermostat. to remove engine cover: 1) locate 4x bolts (hex) 2 at the front, 2 at the back. 2) the 2 bolts to the rear are obscured by a plastic host track. remove plastic hose cover by unclipping and pulling directly forward. 3) undo bolts and lift pull whole cover toward the front of the car. to remove old egr thermostat:. To remove the thermostat: remove the 11mm nut that holds the engine hoist bracket, remove the 13mm bolt of the lower part of engine hoist bracket, and the 3x10mm bolts that hold the thermostat on the block. have some rags below the thermostat as coolant (around 1.5l) will be spilled. you don't want coolant on the engine belt. Part# 11287512762 (4 rib from 9 02) $7.91. expansion tank mounting plate (optional) part# 17111436250. rmeuropean genuine bmw $54.53. automatic cars: (if you drive an auto trans., add the following parts to the above list) expansion tank mounting plate (optional) part# 17111436251. rmeuropean genuine bmw $54.53.
Comments are closed.