How To Check Your Tire Tread And Pressure Youtube The idea of the penny test is to check whether you’ve hit the 2 32” threshold. here’s how it works: place a penny between the tread ribs on your tire. a “rib” refers to the raised portion of tread that spans the circumference of your tire. tire tread is composed of several ribs. turn the penny so that lincoln’s head points down into. Here’s how it’s done: push the blade or pointer portion of the gauge down into the groove of the tread. be sure to take the measurement at three different locations across the tire tread: the outside, the inside, and the middle. it’s time to consider purchasing new tires if the gauge reads between 3 32” and 4 32”.
How To Check Tire Pressure Tread For Safe Driving To check your tread, there are four quick and easy methods. first, grab a penny and insert it into your tire's tread groove with lincoln's head upside down and facing you. if you can see all of lincoln’s head, your tire tread depth is less than 2 32 of an inch, and it's time to replace your tires. another easy option is using a quarter to do. To test tire tread with a quarter, insert it into the tire groove with washington’s head pointing down. if the top of washington’s head is covered by the tread, you have at least 4 32″ of tread depth left, which is considered safe. if you can see all of washington’s head, your tread is less than 4 32″, and you should consider. The penny test. the penny test (shown below) is the easy way to check a tire tread’s depth when you don’t have a depth gauge. if you place a penny in your tire’s tread groove with lincoln’s face down and can see all of his face it’s time for new tires. but as you can see in the video, even 2 32 of an inch of tire tread isn’t a great. Another way to check tread depth is to look at the treadwear indicator bar that's molded into most tires. the bars are located at the bottom of the tread grooves in several locations around the tire. when these bars become visibly flush with the adjacent ribs the tire has no more than 2 32" of tread remaining.
How To Check Tire Pressure Tread For Safe Driving The penny test. the penny test (shown below) is the easy way to check a tire tread’s depth when you don’t have a depth gauge. if you place a penny in your tire’s tread groove with lincoln’s face down and can see all of his face it’s time for new tires. but as you can see in the video, even 2 32 of an inch of tire tread isn’t a great. Another way to check tread depth is to look at the treadwear indicator bar that's molded into most tires. the bars are located at the bottom of the tread grooves in several locations around the tire. when these bars become visibly flush with the adjacent ribs the tire has no more than 2 32" of tread remaining. Find the most worn or lowest point on the tire. place the point of the gauge in between the tires and press the shoulders onto the tread. take the reading. if it is between 2 32 4 32 of an inch. 3. push down on the base of the gauge until the shoulders of the device lie flat against the tread block. 4. grab the barrel of the gauge and carefully remove the device from the groove without touching the probe. 5. make note of the tread depth reading. 6. repeat steps #2 through #5 on various parts of the tire.
Comments are closed.