How To Remove Anti Theft Device From Car Perfect Setup Newsletter Ajax We have come up with a systematic guide on how you can disable the car alarm system. 1. checking the key and cylinder. the first step for knowing how to disable anti theft system of your vehicle includes checking the key fob battery. a dead battery would cause the anti theft system to be disabled. Step 1: check for the anti theft light. it’s located on your dash and will have a blue or red light. step 2: turn the ignition to the "on" position. insert the key into the ignition and turn it to the on position, which activates your accessories but not the engine. leave the key in position for about 10 – 15 minutes.
How To Disable Anti Theft System Without Key Brads Cartunes Here are practical ways to reset the system: using the physical key: some vehicles allow you to reset the anti theft system by using the physical key. insert the key into the driver's side door lock and turn it to unlock and then lock the door. this process may vary depending on the vehicle make and model. To use it, insert the slim jim into the space between the door frame and the window. then, slide it up and down until you feel it catch on the lock mechanism. once you’ve done this, turn the tool to pop open the lock. if your car has a keyless entry system, you can also try using a credit card to enter the car. 1. insert the key in the driver's side door. even if you have a keyless entry, you'll want to use the actual, physical car key and place it in the lock on the outside of the driver's side door. 2. turn the key and hold it. turn the key so that you unlock the door, but hold it in place for several seconds. this can sometimes bypass the factory. Once ten minutes has passed come back and check the anti theft light. if it has gone off, then turn the key back to the off position and remove the key. wait for a couple of minutes to make sure that the system reset is finished. then put the key back in and try to start the car.
How To Disable Anti Theft System Without Key Brads Cartunes 1. insert the key in the driver's side door. even if you have a keyless entry, you'll want to use the actual, physical car key and place it in the lock on the outside of the driver's side door. 2. turn the key and hold it. turn the key so that you unlock the door, but hold it in place for several seconds. this can sometimes bypass the factory. Once ten minutes has passed come back and check the anti theft light. if it has gone off, then turn the key back to the off position and remove the key. wait for a couple of minutes to make sure that the system reset is finished. then put the key back in and try to start the car. Solution #4: reset the anti theft system. download article. manually reset the anti theft system by turning your car on and off. insert your key and hold it in the “off” position for 30 seconds. then, turn the key to “on” and wait at least 10 minutes. flip the position back to off for 30 seconds and repeat the cycle. If your car has a lock and a keypad, you usually need to insert the primary (not valet) key and the following steps. step one: insert the key into the lock and hold it there for 5 to 10 seconds to let the anti theft system detect the rf signal in the key fob. step two: enter the correct entry code.
Comments are closed.