How To Drain Fill And Bleed Coolant System 00 06 Chevy Suburban

How To Drain Fill And Bleed Coolant System 00 06 Chevy Suburban Youtube For more info visit us at: 1aau.to h ug in this video, 1a auto shows you how to check and refill the engine coolant level on the 02 chevy suburbanthis. Twist off the coolant bottle cap. have a drain pan ready. twist off the radiator drain plug. allow the coolant to drain. twist on the radiator drain plug. step 2 :filling the coolant. 1:41. add coolant to the coolant bottle using a funnel. twist on the coolant bottle cap.

Coolant Drain Fill 2000 2006 Chevrolet Tahoe Suburban Youtube In this video, jake diy’s how to drain, bleed, and change the coolant in our 2002 5.3 vortec chevrolet suburban 1500. this coolant flush and refill diy appli. Have a drain pan ready. twist off the radiator drain plug. allow the coolant to drain. twist on the drain plug. step 2 :filling the coolant. 1:06. add coolant to the coolant bottle with a funnel. twist on the coolant bottle cap. run the engine briefly. Start the truck and use warm water to flush out the rest. you will see orange come out of the radiator, when it is clear you have all the dex cool out. make sure the engine is at operating temp and the thermostat has opened. then, reconnect everything and fill w. a 50 50 mix. to bleed, open the fill cap next to the washer fluid. After replacing several cooling system components, i filled the cooling system and bled the air out of the system. the spill free funnel is not a necessity b.

Diy How To Drain Bleed And Change Your Coolant 00 06 Chevrolet Start the truck and use warm water to flush out the rest. you will see orange come out of the radiator, when it is clear you have all the dex cool out. make sure the engine is at operating temp and the thermostat has opened. then, reconnect everything and fill w. a 50 50 mix. to bleed, open the fill cap next to the washer fluid. After replacing several cooling system components, i filled the cooling system and bled the air out of the system. the spill free funnel is not a necessity b. Remove the 7mm bolts from the fender liner. pry out the barbed clips in the liner with a flat blade screwdriver. peel back the fender liner. step 2 :draining the radiator. 1:53. have a drain bucket ready. loosen the hose clamp on the lower radiator hose. pry off the lower radiator hose. let the coolant drain. Step 3 – recheck the coolant level. start the engine and let it run to operating temperatures. once the coolant has had a chance to cycle through the system, check the coolant level in the reservoir again. generally, the fluid level will come down after the engine starts, so more coolant will need to be added.