Butterfly Valves Comprehensive Guide To Design Operation And Butterfly valves are quarter turn flow control devices that utilize a metallic disc that rotates around a fixed stem axis. they are quick action flow control valves that allow rotations through 90 degrees to move from fully opened to a closed position. when the disc is perpendicular to the centerline of the pipe, the valve is at a closed position. Place a disc within the valve seat with the stem holes facing in the proper direction and the taper pin holes pointing up towards the top of the valve plate. o ring for packaging installation. install and screw the packing gland into place. put the bottom cover in place.
How To Maintain A Sanitary Butterfly Valve Adamant Valves Make sure the new handle is compatible with your specific valve model. seal or gasket: shut off the flow, relieve the system pressure, and remove the valve from the pipeline. then, remove the disc and replace the old seal and gasket with new ones. ensure to clean the seating area. reassemble and reinstall the valve. A butterfly valve consists of 4 main parts the body, the valve, seat, and a disk. 1. body. the body is in between 2 pipe edges. there can generally be two designs based on which butterfly valves are made up of – lug and wafer. lug butterfly valves, as the name suggests, contains extended lugs which can join the valves. Clean the lug type butterfly valve from top to bottom. to aid in installation, apply the silicone based base oil or any other lubricant. put the bearing bush within the valve’s body. your seat should now be in the valve body. for simple pipe movement, make sure the openings in the body and seat are lined up. Install four bolts, nuts, and bolts into the hole in the flange and then make sure the nuts are tightened slightly to improve the smoothness of the surface of the flange; 3. spot welding is used to secure the flange to the pipe. 4. take the valve off; 5. the flange should be completely connected and fixed to the pipe.
Comments are closed.