How To Replace Coolant Reservoir Tank Proper Guides Step 6: pry the hoses off the reservoir tank fittings. once the clamps have been moved back onto the hose, you'll need to use a very thin, flat head screwdriver to pry the hose clamps off the fitting. make sure to carefully pry the hose off without piercing the hose. step 7: remove the bottom coolant hose. This is a video tutorial on how to replace the coolant reservoir on a chevrolet silverado, tahoe, and suburban. this guide also applies to the gmc sierra, yu.
How To Replace A Coolant Reservoir In Your Vehicle Youtube Step 1. removing the coolant reservoir overflow hose. remove the reservoir cap and place it to the side. at the top of the coolant reservoir there will be an overflow hose which is designed to relieve the coolant once it has reached the top of the container. using a pair of pliers gently force the tube from the fitting. How to replace a coolant overflow tank. Step 1. remove the bolts. first, remove the reservoir cap and put it on the side. there you get bolts on the front of the reservoir attached to the compartment. these bolts will secure the reservoir to the engine compartment. locate these bolts and remove them by using a small flat screwdriver. step 2. A cracked coolant reservoir costs between $10 and $15 to fix if you are repairing yourself. you only need to buy epoxy for coolant reservoir or your preferred sealant and a piece of smooth sandpaper. however, the typical cost of replacing the coolant reservoir ranges from $150 to $300, including the part and the labor cost.
Comments are closed.