Nissan Qashqa 2013 2021 How To Remove Factory Radio Double Din Video shows step by step how to remove the factory radio & includes part numbers for everything needed if fitting a double din aftermarket radio.also tips on. Removal original radio nissan qashqai and installation of android car stereo pluscenterš link to product pluscenter.co.uk products nissan qashqai.
Nissan Qashqai Radio Removal Nissan Radio Unlock Youtube Here's a nice and simple guide showing how to remove the stock stereo on a nissan qashqai j11 (2014 2021 model) pry tool set available here amzn . 5. pull the factory stereo out, as one piece, and unclip unplug all of the wiring harnesses attached to the radio climate control. 6. remove the 5 torx screws securing the radio climate control on each side, and then remove the factory climate control to reuse in the stereo installation kit you have purchased. 7. There are only 5 wires you need to worry with once you open up your centre console since you're using adapters. then open the head unit box. because the oem in the car only has 5 cables to deal with, the bulk of the wiring work can be done at home. first, attach the cables that comes with the head unit. Remove the bolts, pop out the 12v socket and your ready to install the usb aux in port: pop in the new usb aux port, plug in one end of the 6ft 3.5mm stereo wire into the 3.5mm female port you soldered in, as well as the 6ft usb a to a to the usb port you also soldered in. run the other end of the wires under the center console up to the radio.
How To Remove Stereo In Nissan Qashqai Radio Removal And Installation There are only 5 wires you need to worry with once you open up your centre console since you're using adapters. then open the head unit box. because the oem in the car only has 5 cables to deal with, the bulk of the wiring work can be done at home. first, attach the cables that comes with the head unit. Remove the bolts, pop out the 12v socket and your ready to install the usb aux in port: pop in the new usb aux port, plug in one end of the 6ft 3.5mm stereo wire into the 3.5mm female port you soldered in, as well as the 6ft usb a to a to the usb port you also soldered in. run the other end of the wires under the center console up to the radio. Remove the sepdisp44 front protective film, refit the metal frame and reconnect the flat; solder the metal fasteners that lock the display metal frame to the board; tighten the six black screws previously removed, hook the front part back to the body of the car radio and screw the support tabs back on; reassemble nissan stereo head unit back in. Posts: 5214 joined: sun apr 03, 2016 7:04 am location: gloucestershire, england qashqai model: mk.2 qashqai j11 (2013ā2017).
Remover The Radio Qashqai Desmontar Radio Nissan Qashqai Youtube Remove the sepdisp44 front protective film, refit the metal frame and reconnect the flat; solder the metal fasteners that lock the display metal frame to the board; tighten the six black screws previously removed, hook the front part back to the body of the car radio and screw the support tabs back on; reassemble nissan stereo head unit back in. Posts: 5214 joined: sun apr 03, 2016 7:04 am location: gloucestershire, england qashqai model: mk.2 qashqai j11 (2013ā2017).
Comments are closed.