Pin On Body Swap 8 pin gen 3 to 6 pin ls3 throttle body hardware hack. like hundreds before, i ran into the learning curve of what it would take to successfully run a 4 bolt throttle body on a gen 3. nearly all the threads i have read come to the same conclusion: "buy an x link". i looked at the differences between the 8 and 6 pin tb's, and decided to try a. Re: ls1 harness: start to finish. using these pinouts, label each wire for every connector. i like to wrap the wires every 6 8" to cut down on tangles. label the pcm connector and pin assignment as well as the connector name incase you mix the pin up. there are up to 160 pins and thats alot to get mixed up.
Pin On Body Swap 03 5.3 dbw 8pin to ls2 6 pin conversion. my son and i are starting his 5.3 ls swap in an 85 c10. we bought a new ls2 intake complete with throttle body, fuel rails etc. my question is can the 5.3 dbw 8 pin connector be changed to the 6 pin ls2. we have been looking and some say yes and most say no. Ls swaps: wiring harness and wiring guide. the wiring aspect of any ls swap is undoubtedly the most difficult. most builders are familiar with fabrication techniques, trouble shooting, and parts swapping to make things work, but electronics rise to a much higher level of complexity. wiring has carried an aura of mystery that can send a shiver. Granatelli motorsports. $648.38. granatelli motorsports gm ls 103mm drive by wire throttle body gmtbls3 natural finish granatelli motor sports 103mm throttle bodies for the chevrolet lsx drive by wire applications. the 103mm throttle bodies are precision machined from 6061. Will not work for 2001 2007 vortech truck suv applications. $40.00. current stock: 1. quantity: decrease quantity of ls1 to ls2 throttle body wiring harness adapter. increase quantity of ls1 to ls2 throttle body wiring harness adapter. more payment options. add to wish list. add to quote.
Comments are closed.