Pre Treatment And E Coating Filtration Solutions Pall Corporation

Pre Treatment And E Coating Filtration Solutions Pall Corporation Pre treatment and electro dip painting (pt and ed) high performance filtration is critical at each stage of the pre treat and e coat process to eliminate contaminants, ensuring quality paint and coatings. if the contaminants are not removed from the system, the vehicles can become contaminated again, impacting the effectiveness of chemical. Pall offers liquid filtration solutions that keep cyclic rates high while maximizing surface quality. any contaminant or impurity in the base or clear coat to protective coating application process can lead to in plant rework, complete rejection of body panels, or after sale complaints.

Pre Treatment And E Coating Filtration Solutions Pall Corporation Description. flows to 200 gpm (755 l min) pressures to 250 psi (17 bar) port sizes: 1 1 2" and 2". please note: the 6400 series filter assemblies are no longer available and are being replaced with ultipleat® ut319 filter assemblies. all replacement filter elements, differential pressure indicators and sealkits remain available for this series. Automotive, marksman™ carbon steel series filter housings, parts washing, pretreatment & e coat, test stands, filling lines filling stations, sealant, paint & coatings, stampingautomotiveindustrial manufacturing. Reservoir (solvent): 50l (with fluid level indicator) spray rinsing flow rate: 2.5l min (adjustable) total spray volume: pre configurable. wall wash flow rate: ~12l min (adjustable) wall wash solvent filter rating 0.2 m 1 m; (2 stages absolute) dry weight: approx.600kg. membrane holder: 2 stages cascade, 47mm diameter. Pall’s oil purification solutions remove 100% of free water 80% of dissolved water, they also remove 100% of free and entrained gases and up to 80% of dissolved gases. varnish is the thin, insoluble film deposit that forms on oil wetted surfaces inside a turbine lube system, including bearings and servo valves.