Rake Lifting Mechanism Dbs Manufacturing

Rake Lifting Mechanism Dbs Manufacturing Almost all dbs drive units can be provided with an automatic lifting mechanism that can raise and lower the rakes up to 36 inches (900 mm). rake lifts operate by raising the output shaft into the drive unit on s series models and raising the entire drive unit on d series models. the lift mechanism is fully contained within the drive unit. in. Almost all dbs drive units can be provided with a lifting mechanism that can raise and lower the rakes up to 36 inches (900 mm). rake lifts operate by raising the output shaft into the drive unit on s series models and raising the entire drive unit on d series models. the lift mechanism is fully contained within the drive unit.

Rake Lifting Mechanism Dbs Manufacturing The bridge mounted dual drive is supported by a bridge that extends across the length of the tank. it is typically used on tank sizes from 10 ft to 100 ft (3 to 30 m) in diameter. the main gear and pinion are made from forged alloy steel designed for 20 years of life (calculated per agma 2001 d04). the precision, four point contact main bearing. In addition, the dbs manufacturing powered lift design does not require the lift mechanism to rotate. there are no rotary electrical slip rings to maintain, increasing reliability while reducing possible failure points and overall maintenance. rake lifting mechanisms are commonly found in the pulp and paper industry. Lift mechanism nearly all dbs drive units are available with an optional lifting mechanism. lifts can be manually operated or power driven. dbs uses heavy duty acme thread screw jacks to raise and lower the thickener rake mechanism. the s series drive unit provides rake lift by using a telescoping drive shaft, which lifts into the drive housing. Almost all dbs drive units can be provided with an automatic lifting mechanism that can raise and lower the rakes up to 36 inches (900 mm). rake lifts operate by raising the output shaft into the drive unit on s series models and raising the entire drive unit on d series.

Dbs Drive Units For The Pulp And Paper Industry Rake Lifting Lift mechanism nearly all dbs drive units are available with an optional lifting mechanism. lifts can be manually operated or power driven. dbs uses heavy duty acme thread screw jacks to raise and lower the thickener rake mechanism. the s series drive unit provides rake lift by using a telescoping drive shaft, which lifts into the drive housing. Almost all dbs drive units can be provided with an automatic lifting mechanism that can raise and lower the rakes up to 36 inches (900 mm). rake lifts operate by raising the output shaft into the drive unit on s series models and raising the entire drive unit on d series. Almost all dbs drive units can be provided with a lifting mechanism that can raise and lower the rakes up to 900 mm. rake lifts operate by raising the output shaft into the drive unit on s series models and raising the entire drive unit on d series models. the lift mechanism is fully contained within the drive unit. the lift mechanism is fully contained within the drive unit. in most cases. Description. the dbs bridge mounded dual drive has two concentric output shaft drives: the rake drive and the turbine drive. the rake drive section has a rotating flange hub with attachment points for the output shaft. the gear drive is low speed, high torque, and totally enclosed. it is also designed with positive overload protection.