Schematic Of The Experimental Setup Of A Laboratory Scale Cooling Tower

Schematic Of The Experimental Setup Of A Laboratory Scale Cooling Tower Download scientific diagram | schematic of the experimental setup of a laboratory scale cooling tower from publication: theoretical analysis of a wet cooling tower for fresh water from plume and. Range of 32°c and evaporation rate of 3.6 g s are achieved by the current cooling tower setup. the proposed cooling tower with celdek packing material gave 58% efficiency which is 10% higher as.

Schematic Diagram Of Laboratory Scale Cooling Tower Download Download scientific diagram | schematic diagram of the laboratory scale cooling tower the experimental procedure is as follows: 1. at first water was heated in the reservoir using the heater. 2. Ramkrishnan et al. [8] analyzed the performance of a counter flow wet cooling tower and compared their results with experiments. they studied cooling tower range and tower characteristic variations as a function of air and water flow rates. it was concluded that the tower characteristic has an inverse relation with water to air mass flow rate. Fig. 2 shows the experimental setup of a laboratory scale cooling tower. fig.2 experimental setup 4.3 experimental procedure hot water is pumped from the load tank through the control valve and the water flow meter and then its temperature is measured. 2. experimental setup and procedure. this research begins with problems in learning. it is a cooling tower performance of energy transfer from hot water and coolant air. this object is, hot water from the condenser assumed that water which is heated by an electric heater.