Solidworks Assembly External Reference Best Practices Figure 1: virtual part with external references. right click on the part file in the assembly featuremanager design tree and select open part. (figure 2). for this tutorial, we will save the file as an external file so that it is no longer a virtual part. figure 2: open the virtual part in a new window. with the file open, go to file > save as. Step 2: save the part. if you are now planning on removing the external references to a part that was not originally your design, you should consider that the person who designed this component originally may still want the part to update in the context of their original assembly. it is best practice to use. “save as…” to save your.
Solidworks Assembly External Reference Best Practices External references. you create an external reference when one document is dependent on another document for its solution. if the referenced document changes, the dependent document changes also. in an assembly, you can create an in context feature on one component that references the geometry of another component. If a part contains external references from a multi configuration assembly, best practice is to have a corresponding part configuration for each assembly configuration. a warning appears when you save an assembly if external references from multiple configurations in the assembly influence the definition of a single configuration of a part. Solidworks allows models to be created with links from one file to another, allowing updates in geometry from one file to propagate between documents. these links are called an “external reference” and the most common way to create these is by modelling within the context of an assembly. the references are usually nothing more than sketch. There is a setting in tools>options>system options>external references. 2. go to the part that has the external reference and find the feature (s) that have a little > next to them. this indicates an external reference. right click on the feature and list external refs. within this dialog you can break or delete the references.
Solidworks Assembly External Reference Best Practices Solidworks allows models to be created with links from one file to another, allowing updates in geometry from one file to propagate between documents. these links are called an “external reference” and the most common way to create these is by modelling within the context of an assembly. the references are usually nothing more than sketch. There is a setting in tools>options>system options>external references. 2. go to the part that has the external reference and find the feature (s) that have a little > next to them. this indicates an external reference. right click on the feature and list external refs. within this dialog you can break or delete the references. Open your top down assembly document that contains parts with external references. to lock an external reference right click on the part (or feature in a part document) with the external reference (denoted by the ‘ >’ suffix in the featuremanager design tree). select external references from the shortcut menu. list external references. If a part contains external references from a multi configuration assembly, best practice is to have a corresponding part configuration for each.
Solidworks External References Creating New Parts In An Assembly File Open your top down assembly document that contains parts with external references. to lock an external reference right click on the part (or feature in a part document) with the external reference (denoted by the ‘ >’ suffix in the featuremanager design tree). select external references from the shortcut menu. list external references. If a part contains external references from a multi configuration assembly, best practice is to have a corresponding part configuration for each.
Solidworks Assembly External Reference Best Practices
Comments are closed.