Solidworks Drawing Basics Model View Projected View S Vrog Projected view. projected views are created by folding off an existing view in one of eight possible projections. the resulting view orientation is affected by the setting of first angle or third angle projection as defined in the drawing sheet properties. projected views are created for orthogonal views with the following tools: standard 3 view. Drawing basic model view in solidworks | projected view | section view | edit sheet format | in this tutorial we learn about basic drawing model view in sol.
Solidworks Drawing Basics Model View Projected View S Vrog Projected drawing views in solidworks. so making a 2d drawing in solidworks is pretty simple and recently i ran into some pretty cool functionality that makes 2d drawings a little easier. when placing your first view of your part or assembly, most users will use the view palette to drag and drop their view of choice onto the sheet. You can use an edge of the model to orient the view. select a linear model edge in a drawing view. click tools > align drawing view > horizontal edge or vertical edge. the view rotates until the selected edge is oriented horizontally or vertically. if any views are projected from a view that you rotate this way, the projected views update to. Reference configuration. available when editing existing projected views. configuration name. lets you change drawing view configurations. select bodies. lets you select the bodies of a multibody part for inclusion in the drawing view. for flat patterns of multibody sheet metal parts, you can use one body per view. Now it doesn't. once i place a single view. that's all i can do. then i exit out of the model view command, have to click on the projected view command, then go from there. on a similar note, when i choose "make drawing from part" when i'm working with a model, it does not initiate the insert>model view command once the drawing template opens.
Comments are closed.