Creating A Reference Axis In Solidworks Youtube To set sketch snaps: click options or click tools > options. select relations snaps. select or clear enable snapping to affect all sketch snaps. under sketch snaps, select or clear the appropriate sketch snap. using quick snaps from the menu, the shortcut menu, or the pull down toolbar, you can override any sketch snap that is cleared under. To create a reference axis: click axis on the reference geometry toolbar, or click insert > reference geometry > axis. select the axis type in the axis propertymanager, then select the required entities for that type. verify that the items listed in reference entities correspond to your selections. click .
Solidworks Basics Of Reference Geometry Axis Reference geometry in a model is hidden by default when you create drawing views. however, if you insert reference geometry with insert model items, entities of the selected types are shown. when you insert reference geometry into drawings, axes, and points are shown in gray. surfaces are shown as visible lines (black). to toggle the display. Learn about five different options on how to create a reference geometry axis in solidworks. First start a sketch and add a line with the angle and distance. create a reference sketch. then when generating a reference plane, selecting the line and an endpoint will place it normal to the line and coincident to the endpoint. reference plane based on sketch line. the same can be done with a 3d sketch line, or even using an edge and vertex. How and when to make a new reference axis in solidworkswelcome to our solidworks tutorial series! in this episode, we'll dive into the essential skill of cre.
Comments are closed.