Tcc Lockup Issue Need Help Car Stalls When Put In Gear Youtube Car has a multi disk lock up converter! with the converter unlocked it still nearly stalls the car sometimes it will completely stall the car! i'm using holl. Part 2 on the stalling at stop van after further diagnosing and driving. it was determine that the t conv would not unlock lock up mode and simply stall and.
Transmission Can Cause Your Car To Stall At Stops Tcc Lockup P0740 Let's talk about locking and unlocking the tcc (torque converter clutch).no files for this video, but here is the link in case you missed it previously.googl. Posted: aug 8, 2014. options. p0741 toyota torque converter clutch solenoid performance. possible causes. low transmission fluid level. dirty transmission fluid. faulty torque converter clutch solenoid valve. torque converter clutch solenoid valve harness or connectors. torque converter clutch solenoid valve circuit is open or shorted. That is why i posted the converter is the cause, unless you have an engine problem that causes the engine to stall. if the converter clutch is applied for some reason, you put the trans into gear, the engine dies. if the engine has problems, that may cause it to stall out when placed into gear. Connect the other end of the jumper wire to ground. road test for lock up (can be done on a lift). if you're not sure if lock up occurred, then hold a steady speed of 60 mph (on the lift) and lightly touch and release the brake. you should feel lock up disengage and re engage.
Comments are closed.