The Correct Way To Drive A Forklift Truck A Safe

Forklift Safety Tips Rules For The Workplace Texas Motive If you are on a seated truck and do feel it tipping over, stay within the confines of the cab. brace yourself by pressing your feet on the floor and holding tight on the steering wheel or overhead guard – but take care not to get your fingers trapped between the guard and the ground. lean away from the direction the forklift is tipping. This allows them to check the information shown on the gauges and warning lights. before driving a forklift, make sure the battery power, oil pressure, etc are all within normal limits. the operator should also test the signal lights and horn. lift, tilt, and other hydraulic controls can also be checked at this stage.

The Correct Way To Drive A Forklift Truck A Safe The armrest, seat position and mirrors should be correctly adjusted and the safety belt should always be fastened. never operate a lift truck unless you are in the operator's seat and keep arms, legs and head inside the confines of the truck at all times. 5. the operating environment. Drive slowly and attentively. look in the direction of, and keep a clear view of, the path of travel. always operate the forklift at a speed that will allow you to stop safely. slow down on wet or slippery floors. if the load you’re carrying obstructs your forward view, travel with the load trailing instead. Observe all traffic regulations, including authorized plant speed limits. maintain a safe distance, approximately three truck lengths from the truck ahead, and keep the truck under control at all times. [29 cfr 1910.178(n)(1)] yield the right of way to ambulances, fire trucks, or other vehicles in emergency situations. [29 cfr 1910.178(n)(2)]. Quality operator safety training is the best way to improve forklift safety. so what does “ proper forklift training ” require? overall, osha forklift requirements state that employers must provide: formal instruction: this includes classroom based lessons that cover all 22 forklift safety topics listed in standards 1910.178(l)(3)(i) and.