Engine Water Pump For Saab 9 5 1999 2009 900 Series 9 3 In this detailed video i explain how to replace the water pump in a saab 9 3 ( '99 '02 and '03 convertible) (the 4 cyl. '94 98 900 and og 4 cyl.9 5 are simil. Release the tension on the belt tensioner with a 1 2" square extension bar and place a 6 mm drill in the hole. undo the steering servo pump with its console and hang it up on the radiator crossmember. undo the coolant hoses and the pipes on the pump. undo the screw which holds the coolant pipe in the engine's front left hand corner.
Water Pump Saab 900 9 3 9 5 2 0 2 6. remove the serpentine belt by turning the nut on the belt tensioner (the pully in the back top part of engine as you are looking at the engine from above, and standing in front of car) clockwise. 7. remove pulleys: belt tensioner, water pump, and idle pulley (water pump is upper middle, idle is top front). Step 4. saturate the oxygen sensors’ threads and the 3 nuts on each end of the catalytic converter with pb blaster, then let it sit penetrate for a few minutes. step 5. carefully unplug both oxygen sensors connections. step 6. crack open the coolant reservoir cap to allow easier draining in subsequent steps. step 7. Water pump kit: eeuroparts product genuine saab 5958061water pump and thermostat assembly kit: eeuroparts product eeuroparts 3332466k. For saab 9 3 base se viggen 9 5 900 l4 2.0 2.3 engine water pump with gasket gmb (fits: 1999 saab 9 3) brand new : gmb (6) 6 product ratings for saab 9 3 base se viggen 9 5 900 l4 2.0 2.3 engine water pump with gasket gmb.
Comments are closed.