Install A Ceiling Fan With Two Wall Switches Learn how to connect a ceiling fan and a light to a double switch with diagrams and explanations. find out the terminals, capacitor, and precautions of wiring a fan and a light. The wiring diagram for a ceiling fan with 2 switches typically involves two hot wires, a neutral wire, and a ground wire. the two hot wires are used to control the fan and the light separately. one hot wire is connected to the fan switch, while the other hot wire is connected to the light switch. the neutral wire is connected to the white wire.
Wiring A Ceiling Fan With Two Switches Step 2: unpack fan and prep for install. link to my fan: baxtan 56″ ceiling fan (i’ve also used this hack with this, larger fan: honeywell ceiling fans xerxes, 62 inch) feed the electrical wires from the motor, through the downrod and then screw the downrod into the threads on the top of the motor. threading the wire can be a bit tricky if. In your setup, the white wire in the 3 would get black markings on both ends. so would the white wire between the switches. the upper switch's red pigtail also needs a black marking; it is always hot. in the 3 cable, mark black on both ends as blue. in the 2 cable between the switches, the black wire gets tagged with red tape on both ends. If you want to control your light separate from your ceiling fan, this is how to wire a single pole configuration. using the pull chains is the old school wa. If there is a blue and black wire coming from the household circuit, there should be two switches on the wall. if there is a red wire coming from the ceiling, it is hooked up to the wall switch. the wire colors connected to the fan: black wire is for the fan. blue wire is for the lamp if one is included with the fan. white wire is neutral.
Comments are closed.