Xylem Lowara Ff128dp Series Installation Operation And Maintenance 6.2 maintenance every 4000 hours of operation or every year. when the first of the two limits is reached: measure the pressure at zero flow rate and compare it with the pressure measured during initial start up; if the pressure has decreased by more than 15%, check the condition of impeller, pump body and wear rings. Page 3: table of contents. ff128dp ff128dp unita’ controllo diesel engine fire pump controllers motopompa antincendio en12845) en12845) manuale operativo instructions manual attenzione!! warning! ϋ leggere attentamente il manuale prima dell’utilizzo e l’installazione. carefully read the manual before the installation or use.
Xylem Lowara Baureihe Series Installation And Operation Instruction Manuals and user guides for xylem lowara ff128dp series. we have 1 xylem lowara ff128dp series manual available for free pdf download: installation, operation and maintenance manual. The purpose of this manual is to provide necessary information for: installation. operation. maintenance. caution: read this manual carefully before installing and using the product. improper use of the product can cause personal injury and damage to property, and may void the warranty. notice:. Arrange the connections on the terminal block closed end splices in accordance with the required power supply. connect the mains leads (l1, l2, l3, and ground (earth) ) according to applicable cable chart. the ground (earth) lead must be 50 mm (2.0 in.) longer than the phase conductors in the junction box of the unit. Connect the t3 and t4 cables from the mixer or the pump to the t3, t4 terminal. create as much separation as possible between the power cores and the control cables. keep the t3 and t4 cables twisted and shielded as close to the terminals as possible. ethernet.
Xylem Lowara E Ixpsa Manuals Manualslib Arrange the connections on the terminal block closed end splices in accordance with the required power supply. connect the mains leads (l1, l2, l3, and ground (earth) ) according to applicable cable chart. the ground (earth) lead must be 50 mm (2.0 in.) longer than the phase conductors in the junction box of the unit. Connect the t3 and t4 cables from the mixer or the pump to the t3, t4 terminal. create as much separation as possible between the power cores and the control cables. keep the t3 and t4 cables twisted and shielded as close to the terminals as possible. ethernet. Follow the instructions in the installation, operation, and maintenance manual for the pump and the control panel. open the shutoff valve. switch on the main power supply. check that the unit is emptied from water: fill the tank with water up to the start level. check that the pump stops within 4 minutes. 1. series name 2. display present or not present 3. maximum head, feet 4. maximum flow, gallons (us) per minute 5. pump body, cast iron or stainless steel. 3 product description ecocirc 20 18 installation, operation, and maintenance manual 9.
Lowara From Xylem Pumps Uk Service Follow the instructions in the installation, operation, and maintenance manual for the pump and the control panel. open the shutoff valve. switch on the main power supply. check that the unit is emptied from water: fill the tank with water up to the start level. check that the pump stops within 4 minutes. 1. series name 2. display present or not present 3. maximum head, feet 4. maximum flow, gallons (us) per minute 5. pump body, cast iron or stainless steel. 3 product description ecocirc 20 18 installation, operation, and maintenance manual 9.
Xylem Lowara E Sve Installation Operation And Maintenance Manual Pdf
Comments are closed.